How To Clean a Laptop Touchpad? Solved

You should keep each and every part of your laptop clean regardless of what it is. The touchpad, however, requires great care and concern because it is a sensitive part other than the screen. So, how to clean a laptop touchpad? Here’s how. 

It’s More About The Cleaning Agent 

While you may think that it’s more about the way you clean the touchpad, it all boils down to what cleaning agent you use. That makes sense because chemicals used in it may hurt the component. Therefore, you’d have to be careful about it. 

Let’s get to it. 

Cleaning A Laptop Touchpad 

What you require:

  • A microfiber cloth 
  • Water in a bowl 
  • A dry cloth or sponge 
  • Glass cleaner or dishwasher 
  • 50% isopropyl swabs 

Why Do You Need These Cleaning Agents? 

The microfiber cloth has small perforations to remove any gunk or accumulated dust from the trackpad. Once you’re done cleaning with it, you’d need a dry cloth to do away with the dishwasher or glass cleaner. The water is needed to dampen the microfiber cloth because that’s how the cleaning agents will stick to it in a better way. 

Also, the 50% isopropyl swabs are meant to sanitize the touchpad and give a finishing touch to the whole process. 

How To Clean a Laptop Touchpad? Steps

Here are the steps that you can follow to clean the laptop touchpad.

Step 1: 

Turn off your laptop. This is important because the cleaning agent may somehow in the most unwanted way get to the components inside. That’s especially when you’re careless enough to use a lot of them. The risk of electrocution is still there, anyhow. 

Step 2: 

Take the microfiber cloth and damp it in a bowl containing water. Wring it well to remove excess water and use it to clear away all the dust from the touchpad and the areas surrounding it. You could clean the whole laptop at this point. No one’s going to blame you at all for going that extra mile. 

Step 3: 

Now, take a droplet of dishwasher soap on the cloth and rub it gently to get the foam out. Start wiping the touchpad gently enough in round motions. Do not apply too much force to the component as it may cause some mechanical harm to it. You could do the same to the whole laptop. But when you’re cleaning the keyboard, make sure that you don’t accidentally get the soap inside. One way to avoid that is to mix the dishwasher in the water and only take its foam on the cloth. 

Step 4: 

It’s time to remove the foam from the entire laptop. Take the dry cloth and wipe the areas where you’ve wiped the previous one. If need be, soak the microfiber cloth in water to remove the foam and then use it to wipe the laptop once again. At this stage, you may need more than one piece of dry cloth to completely dry out the machine. Alternatively, you can use a hairdryer to dry the whole thing. But make sure that the setting is not more, just so you may not fry any component – particularly the keyboard keys. 

Step 5: 

Is the touchpad clean enough now or are there stubborn stains laughing at you? If it’s the latter, then you need to take rigorous measures. By that, I mean using the 50% isopropyl cotton swabs. Isopropyl is the usual rubbing alcohol that may be present in your house, waiting to be used. Well, don’t keep it waiting, for it’s time for it to show what it can do. 

Dip one of the corners of the microfiber cloth in rubbing alcohol and wring it well. 

Place the cloth on the stubborn stains. 

Leave it there for about a minute or so. 

In the meanwhile, keep checking it every 15 seconds. 

If there is even a slight indication of discoloration, remove the cloth. 

If not, you should see the gunk coming off like it didn’t belong there. 

You can do the same by using vinegar and water solution. Take one part vinegar and one part water. Mix them in a bowl and use that solution instead of alcohol if you see slight discoloration because of the former. 

Step 6:

Leave the laptop to dry out at room temperature after all that cleaning. Enjoy the squeaky touchpad! 

How To Clean a Laptop Touchpad

What Not To Do When Cleaning The Touchpad?

Do not apply the cleaning agents on the touchpad or anywhere else directly. This may cause harm to the electrical components beneath the keyboard or inside the chassis. You may even get electrocuted. So, unless you want a bizarre haircut, don’t do this. 

You should use dedicated cleaning agents but know that will be an investment for the future. This article deals with the things that are available around your house. Why not use them instead?

Do not rub the touchpad surface vigorously. If it fits you well, flush out all the negative thoughts that will make you divert your anger on the poor thing. Remain calm and collected because it’s your laptop that you’re cleaning, not a punching bag. 

If the trackpad received its share of harm and it stopped working after the cleaning, worry not. Shut it down immediately. Take your blow dryer and at minimum settings, blow the hell out of any water left on the inside. Wait for a few hours before resuming your work. If the trackpad still doesn’t work, then you’ve got some warranty claiming to do – that is if it’s not expired. Otherwise, laptop repairs are dime a dozen. 

Does water damage the touchpad?

Touchpads are sensitive parts of your laptop that relay touch inputs to your display. The circulatory system of your touchpad will be damaged if it is somehow exposed to water droplets, so keep those fluids away from it while you work.

How do you fix a sticky laptop touchpad?

The first and foremost thing you could do is turn off your laptop and either use compressed Air spray to flush away any dust and debris that may clog the touchpad. If nothing helps, using Isopropyl as your cleaning solution may produce outstanding results.

How to clean under the laptop touchpad?

Never use a tissue to pry away any gunk that has been clogged below your touch. Use a clean MicroFiber piece of cloth as well as Rubbing Alcohol(Isopropyl Solution) to wipe away the dirty nooks and crannies of your touchpad.

How To Clean Laptop Touchpad – Conclusion 

It’s really not about how you could clean it but what cleaning agents you could use. I stress upon the cleaning agents because they can help you remove all the dirt and gunk without harming the hardware at all. So, take my advice, and use rubbing alcohol, dishwashing liquid, an abrasive sponge, or a damp microfiber cloth. Follow the instructions above that tell you how to use these. One thing’s for sure, they work great.